SPLL 04-01 | Extended 90° Male Elbow - Stainless Steel Push in Fitting | 4mm O.D Tubing, R, PT, BSPT 1/8 Male Thread
SPLL 04-01 stainless steel push in fitting extended 90° male elbow connects 4mm O.D tubing to R, PT, BSPT 1/8 female threaded device at a 90 degree angle with a lengthen body. SPLL 04-01 extended male elbow swivel is designed to be used in parallel with the standard male elbow. The extended height body allows the fitting to reach above other standard male elbows in limited space and prevents interference of the fittings. This 4mm O.D tubing x PT, R, BSPT 1/8 extended male elbow stainless steel push in fitting is manufactured entirely for 316 stainless steel and incorporate FKM (Viton), best choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. The swivel feature on the male stud end allows setting the tube connector where you want after tightening the thread.
Thread Size: PT, R, BSPT 1/8
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...