SJSC 3/8-04 | Speed Controller - Stainless Steel Push in Fitting | 3/8" O.D Tubing, R, PT, BSPT 1/2 Male Thread
SJSC 3/8-04 speed controller stainless steel push in fitting is used to connect a 3/8" tubing connection a female R, PT, BSPT 1/2 thread at a right angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 3/8" O.D tubing x R, PT, BSPT 1/2 flow control regulator stainless steel push to connect fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 3/8" O.D tubing x R, PT, BSPT 1/2 flow controller stainless steel fittings are normally used in food production areas where stainless steel components are required to prevent food contamination. Control-out and control-in flow control valves are available.
Thread Size: R, PT, BSPT 1/2
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring:FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...