SJSC 12-03 | Flow Control Regulator - Stainless Steel Push in Fitting | 12mm O.D Tubing, PT, R, BSPT 3/8 Male Thread
SJSC 12-03 flow control regulator stainless steel push in fitting is used to connect a 12mm tubing connection a female R, PT, BSPT 3/8 thread at a right angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 12mm O.D tubing x R, PT, BSPT 3/8 flow control valve stainless steel push to connect fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 12mm O.D tubing x R, PT, BSPT 3/8 flow controller stainless steel pneumatic fittings are designed to withstand corrosive environments, to channel aggressive fluids and to be used in the food, pharmaceutical and chemical industries, as well as extreme hot and cold conditions. Control-out and control-in flow control valves are available.
Thread Size: R, PT, BSPT 3/8
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring:FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...