SJSC 1/4-N01 | Flow Control Regulator - Stainless Steel Push to Connect Fitting | 1/4" O.D Tubing, 1/8 NPT Male Thread

SJSC 1/4-N01 flow control regulator stainless steel push to connect fitting is used to connect a 1/4" tubing connection a female 1/8 NPT thread at a right angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 1/4" O.D tubing x 1/8 NPT flow control valve stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 1/4" O.D tubing x 1/8 NPT speed controller stainless steel fittings are lightweight, compact, and suitable for use with polyethylene, nylon, or polyurethane tubing. Control-out and control-in flow control valves are available.

Flow Control Regulator 1/4" Tubing, 1/8 NPT Stainless Steel Push to Connect Fitting
Push-in Tubing O.D: 1/4"
Thread Size: 1/8 NPT
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Seal, O-ring: FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: £2.18
Request for Quotation

Downloads
Series Catalog
View 3D Model
Installation, Usage, Cautions