SJSC 1/4-G03 | Speed Controller - Stainless Steel Push to Connect Fitting | 1/4" O.D Tubing, BSPP, G 3/8 Male Thread

SJSC 1/4-G03 speed controller stainless steel push to connect fitting is used to connect a 1/4" O.D tubing connection a female BSPP, G 3/8 thread at a right angle, provides accurate flow regulation for precise speed control of pneumatic cylinders as well as gas flow in environments with high temperature, mechanical or chemical constraints. 1/4" O.D tubing x BSPP, G 3/8 flow control regulator stainless steel push in fitting is made of 316 stainless steel for corrosion resistance, FKM sealing material for chemical-resistance. 1/4" O.D tubing x BSPP, G 3/8 flow control valve stainless steel pneumatic fitting has an FKM (Viton) o-ring on the thread to provide safe sealing. 1/4" O.D tubing x BSPP, G 3/8 flow controller stainless steel fittings reduce assembly time by eliminating the use of a sleeve and tightening of a nut required in compression style fittings. Control-out and control-in flow control valves are available.

Speed Controller 1/4" Tubing, BSPP, G 3/8 Stainless Steel Push to Connect Fitting
Push-in Tubing O.D: 1/4"
Thread Size: BSPP, G 3/8
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam ...
Body Material: 316 Stainless Steel
Thread Material: 316 Stainless Steel
Thread Sealing: O-ring
Seal, O-ring:FKM (Viton)
Working Pressure: 0∼2.0MPa | 0∼290psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: -20∼150°C | -4∼302°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / Teflon Tubing ...
Price: £4.15
Request for Quotation

Downloads
Series Catalog
View 3D Model
Installation, Usage, Cautions