Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Stainless steel flow control valve ( speed controller, flow control regulator) with G, BSP, BSPP thread is made of 316 stainless steel for corrosion resistance, FKM / Viton seal and o-ring for chemical-resistance; and the flow control valve control the speed of low-speed fluid flow. Accurate regulation of an optimal airflow rate for precise motion control, control-out and control-in are available. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D 1/8" to 1/2". Thread sizes range is from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.

Control-out controls the flow rate of fluid entering from the thread side can be controlled, whereas fluid entering from the tube side comes out from the thread side at the same (not controlled) flow rate.

Control-in controls the flow rate of fluid entering from the tube side can be controlled, whereas fluid entering from the thread side comes out from the tube side at the same (not controlled) flow rate

The stainless steel flow control valve is suitable for handling pressures up to 290 pounds per square inch (psi) (20 bar) and has an operating temperature range of -20 to +150 degrees C (-4 to +302 degrees F). Stainless steel flow control valves are used in various applications, including air, water, and steam in both vacuum and pressure applications, food and beverage applications, machine tools, airplane, truck controls, and automated production lines.

Stainless Steel Flow Control Valve, Stainless Steel Speed Controller   Fluid Admitted Air, Water, Steam, and Other Liquid
  Max Working Pressure 0—2.0 MPa | 0—290 psi
  Working Temperature -20°C—150°C | -4°F—302°F
  Body Stainless Steel 316
  Seal, O-ring FKM (Viton)
  Applicable Pipe PU / PA / PE / Teflon Tubing
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
Thread Standard and Type
BSPP, G - 55° Parallel Pipe Thread
G1/8 G1/4 G3/8 G1/2

Metric Tube to G, BSP, BSPP Thread

Part No. Tube ΦD Thread (G, BSP, BSPP)
SJSC 04-G01 4mm G1/8
SJSC 04-G02 4mm G1/4
SJSC 06-G01 6mm G1/8
SJSC 06-G02 6mm G1/4
SJSC 06-G03 6mm G3/8
SJSC 06-G04 6mm G1/2
SJSC 08-G01 8mm G1/8
SJSC 08-G02 8mm G1/4
SJSC 08-G03 8mm G3/8
SJSC 08-G04 8mm G1/2
SJSC 10-G01 10mm G1/8
SJSC 10-G02 10mm G1/4
SJSC 10-G03 10mm G3/8
SJSC 10-G04 10mm G1/2
SJSC 12-G01 12mm G1/8
SJSC 12-G02 12mm G1/4
SJSC 12-G03 12mm G3/8
SJSC 12-G04 12mm G1/2
SJSC 14-G03 14mm G3/8
SJSC 14-G04 14mm G1/2
SJSC 16-G02 16mm G1/4
SJSC 16-G03 16mm G3/8
SJSC 16-G04 16mm G1/2

Inch Tube to G, BSP, BSPP Thread

Part No. Tube ΦD Thread (G, BSP, BSPP)
SJSC 1/8-G01 1/8" G1/8
SJSC 1/8-G02 1/8" G1/4
SJSC 5/32-G01 5/32" G1/8
SJSC 5/32-G02 5/32" G1/4
SJSC 3/16-G01 3/16" G1/8
SJSC 3/16-G02 3/16" G1/4
SJSC 3/16-G03 3/16" G3/8
SJSC 1/4-G01 1/4" G1/8
SJSC 1/4-G02 1/4" G1/4
SJSC 1/4-G03 1/4" G3/8
SJSC 1/4-G04 1/4" G1/2
SJSC 5/16-G01 5/16" G1/8
SJSC 5/16-G02 5/16" G1/4
SJSC 5/16-G03 5/16" G3/8
SJSC 5/16-G04 5/16" G1/2
SJSC 3/8-G01 3/8" G1/8
SJSC 3/8-G02 3/8" G1/4
SJSC 3/8-G03 3/8" G3/8
SJSC 3/8-G04 3/8" G1/2
SJSC 1/2-G01 1/2" G1/8
SJSC 1/2-G02 1/2" G1/4
SJSC 1/2-G03 1/2" G3/8
SJSC 1/2-G04 1/2" G1/2


Coming soon