Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Socke Y quick coupler splits a single air source into three air hose lines, allows you to connect and operate three tools from a single compressor. It features industrial interchangeable plug for quick-disconnect couplings for hoses and pneumatic tools. Used on end of hose or air supply for connection to hose or tool, for use with industrial interchange plug. The ball lock design insures a tight seal connection every time. When using the quick coupler slide back the sleeve, push in the connector and then slide back the sleeve fully to lock in the connector. The spring loaded quick release couplers which should be used on the compressor so that the air is contained when the air tool is disconnected. Sockets and plugs for can be connected with each other regardless of end configurations. Just push in the plug to the socket for connection by easy one hand operation. Plug sizes range is from 1/8 to 1/2.

Socket Y, Quick Couplers    Fluid Admitted Air, Oil, Water(no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU (Polyurethane) / PA (Nylon)
   Body Chrome Plated Steel
55° Taper Pipe Thread
Code 20 30 40
Thread R1/4 R3/8 R1/2

Model R
SMY-20 R1/4
SMY-30 R3/8
SMY-40 R1/2