PV 10 | Push in Fitting - Equal Elbow | 10mm O.D Tubing x 10mm O.D Tubing
PV 10 push in fitting equal elbow is used to connect two 10mm tubing with same diameter on the both ends at a right angle. 10mm O.D tubing x 10mm O.D tubing union elbow push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 10mm O.D tubing equal union elbow push in fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.83
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PV Union Elbow