PV 1/2 | Push in Fitting - 90 Degree Union Elbow | 1/2" O.D Tubing x 1/2" O.D Tubing
PV 1/2 push in fitting 90 degree union elbow is used to connect two 1/2" tubing with same diameter on the both ends at a right angle. 1/2" O.D tubing x 1/2" O.D tubing union elbow push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 1/2" O.D tubing union elbow connector push in fitting allows tubing to be connected and reconnected repeatedly without damaging the tube or fitting.
Push-in Tubing O.D: 1/2"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.83
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PV Union Elbow