PU 10 | Push in Fitting - Equal Straight | 10mm O.D Tubing x 10mm O.D Tubing
PU 10 push in fitting equal straight is used to connect two 10mm O.D nylon, polyurethane, polyethylene or Teflon tubing on both ends. 10mm O.D tubing x 10mm O.D tubing union straight connector push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 10mm O.D tubing union straight push in fittings allow for a fast and easy way to repeatedly connect and disconnect air or fluid lines.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.00
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PU Union Straight