PLM 1/4 | Push in Fitting - Bulkhead Elbow | 1/4" O.D Tubing x 1/4" O.D Tubing
PLM 1/4 pneumatic push in fitting (push to connect fitting) bulkhead elbow is used to connect 1/4" O.D tubing on both end through a panel or partition. The elbow design allows for a 90° change of tube direction. High quality PBT and brass body and brass thread with M12 lock nut for resistance to corrosion. Round release sleeves allow the lock nut and tubing to be removed easily.
Push-in Tubing O.D: 1/4"
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.53
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PLM Bulkhead Union Elbow