PK 10 | Push in Fitting - Union Branch Connector | 10mm O.D Tubing x 10mm O.D Tubing
PK 10 union branch connector push in fitting is used to connect two 10mm tubing connections on both ends in straight line and three 10mm tubing on the branch with same diameter at right angles. 10mm O.D tubing x 10mm O.D tubing union branch push to connect fitting is made of strong thermoplastic (PBT), POM release sleeve and stainless steel tube gripping claws. 10mm O.D tubing equal union branch push in fittings enable quick tubing connection and disconnection.
Push-in Tubing O.D: 10mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.87
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PK Union Branch