PE 14 | Push in Fitting - Equal Tube Tee | 14mm O.D Tubing x 14mm O.D Tubing
PE 14 equal tube tee push in fitting is used to connect two 14mm tubing in straight line and one branch at a right angle from the middle of the tee with same diameter. 14mm O.D tubing x 14mm O.D tubing union tee push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 14mm O.D tubing union tee connector push in fittings are designed for quick tubing connection and disconnection.
Push-in Tubing O.D: 14mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡1.02
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PE Union Tee