PE 09 | Push in Fitting - Equal Tee Fitting | 9mm O.D Tubing x 9mm O.D Tubing
PE 09 equal tee fitting push in fitting is used to connect two 9mm tubing in straight line and one branch at a right angle from the middle of the tee with same diameter. 9mm O.D tubing x 9mm O.D tubing union tee push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 9mm O.D tubing equal union tee push in fittings enable quick tubing connection and disconnection.
Push-in Tubing O.D: 9mm
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Fluid Admitted: Air, Vaccum, Water(no freezing)
Body Material: PBT Plastic
Seal, O-ring: NBR
Working Pressure: 0∼1.0MPa | 0∼150psi
Proof Pressure: 3.0Mpa | 435psi
Negative Pressure: -100Kpa | -29.5 In Hg
Working Temperature: 0∼60°C | 32∼140°F
Lock Claw: Stainless Steel(SUS)
Applicable Tube: PU / PA / PE / PVC
Price: ￡0.76
Downloads
Parent Category: Push in Fittings (PT, R, BSPT Thread) PE Union Tee