Flow Control Valves, Flow Control Regulators - BJSC-G Meter-in

Brass flow control valve with O-ring meter-in style is made of nickel plated brass for corrosion resistance, ductility at high temperatures and low magnetic permeability for alternative to plastic ones. Meter-in brass flow control valve ( brass flow control regulator, brass speed controller) controls the flow rate of air entering from the tube side, whereas air entering from the thread side comes out from the tube side at the same (not controlled) flow rate. A knobbed screw with a locking nut is used to adjust air flow on the inlet side. Available with push to connect output fittings. Multiple sizes available. Maximum operating pressure of 2.0 MPa (290 PSI). Operational temperature range of -20—120°C (-4°F to 248°F). Accommodate metric tubing O.D ranging from 4 mm to 16 mm and inch tubing O.D 1/8" to 1/2". Thread sizes range is from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.

All Pneuflex's flow control valves can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.