Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Compact (miniature) one touch fittings of union tee is used to connect two air hose tubes of equal diameters at a 90-degree angle to a third tube. Mini push in fitting union tee is compact designed, ideal for confined space. You can install them where normal pneumatic fittings are not are not sufficiently compact. The body of compact pneumatic fitting union tee is made of PBT, stainless steel retaining claws which securely retain the tubing and NBR sealing ring between the tubing and body of the fitting which forms a perfect seal. Miniature push to connect fittings are available for tube diameters from 3 mm, 4 mm and 6 mm. Working pressure from 0~1.0 Mpa (0~150 psi). Working temperature from 0~60ºC (32~140ºF). Miniature push in fittings are suitable for miniature cylinder, miniature gripper, miniature solenoid valve and 3D printer.

Union Tee, Compact (Miniature) One Touch Fittings, Mini Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 1.5 Mpa | 250 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU (Polyurethane) / PA (Nylon)
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel (SUS)
Metric Tube ØD
3 mm 4 mm 6 mm

Union Tee, Compact (Miniature) One Touch Fittings, Mini FittingsPE-C Union Tee, Compact (Miniature) One Touch Fittings
Part No. ΦD(mm) ΦP B E
PE3C 3mm 6.2 22.8 11.4
PE4C 4mm 8.1 28.2 14.1
PE6C 6mm 10.7 32.2 16.1