Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / BJSC-G Control-in

Brass flow control valve with O-ring meter-in style is made of nickel plated brass for corrosion resistance, ductility at high temperatures and low magnetic permeability for alternative to plastic ones. Meter-in brass flow control valve ( brass flow control regulator, brass speed controller) controls the flow rate of air entering from the tube side, whereas air entering from the thread side comes out from the tube side at the same (not controlled) flow rate. A knobbed screw with a locking nut is used to adjust air flow on the inlet side. Available with push to connect output fittings. Multiple sizes available. Maximum operating pressure of 2.0 MPa (290 PSI). Operational temperature range of -20—120°C (-4°F to 248°F). Accommodate metric tubing O.D ranging from 4 mm to 16 mm and inch tubing O.D 1/8" to 1/2". Thread sizes range is from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.

All Pneuflex's flow control valves can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Brass Flow Control Valves, Metal Speed Controller    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—2.0 MPa | 0—290 psi
   Working Temperature -20—120°C | -4~248°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass
   Seal, O-ring NBR
   Lock Claw Stainless Steel (SUS)
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
Thread Standard and Type
G, BSP, BSPP -- 55° Taper Pipe Thread
G1/8 G1/4 G3/8 G1/2

Metric Tube (mm)- G, BSP, BSPP Thread

Part No. Push-in Tube ΦD(mm) Thread (G, BSP, BSPP)
BJSC 04-G01B 4mm G1/8
BJSC 04-G02B 4mm G1/4
BJSC 06-G01B 6mm G1/8
BJSC 06-G02B 6mm G1/4
BJSC 06-G03B 6mm G3/8
BJSC 06-G04B 6mm G1/2
BJSC 08-G01B 8mm G1/8
BJSC 08-G02B 8mm G1/4
BJSC 08-G03B 8mm G3/8
BJSC 08-G04B 8mm G1/2
BJSC 10-G01B 10mm G1/8
BJSC 10-G02B 10mm G1/4
BJSC 10-G03B 10mm G3/8
BJSC 10-G04B 10mm G1/2
BJSC 12-G01B 12mm G1/8
BJSC 12-G02B 12mm G1/4
BJSC 12-G03B 12mm G3/8
BJSC 12-G04B 12mm G1/2
BJSC 14-G02B 14mm G1/4
BJSC 14-G03B 14mm G3/8
BJSC 14-G04B 14mm G1/2
BJSC 15-G02B 15mm G1/4
BJSC 15-G03B 15mm G3/8
BJSC 15-G04B 15mm G1/2
BJSC 16-G02B 16mm G1/4
BJSC 16-G03B 16mm G3/8
BJSC 16-G04B 16mm G1/2

Inch Tube - G, BSP, BSPP Thread

Part No. Push-in Tube ΦD(Inch) Thread (G, BSP, BSPP)
BJSC 1/8-G01B 1/8" G1/8
BJSC 1/8-G02B 1/8" G1/4
BJSC 5/32-G01B 5/32" G1/8
BJSC 5/32-G02B 5/32" G1/4
BJSC 3/16-G01B 3/16" G1/8
BJSC 3/16-G02B 3/16" G1/4
BJSC 3/16-G03B 3/16" G3/8
BJSC 1/4-G01B 1/4" G1/8
BJSC 1/4-G02B 1/4" G1/4
BJSC 1/4-G03B 1/4" G3/8
BJSC 1/4-G04B 1/4" G1/2
BJSC 5/16-G01B 5/16" G1/8
BJSC 5/16-G02B 5/16" G1/4
BJSC 5/16-G03B 5/16" G3/8
BJSC 5/16-G04B 5/16" G1/2
BJSC 3/8-G01B 3/8" G1/8
BJSC 3/8-G02B 3/8" G1/4
BJSC 3/8-G03B 3/8" G3/8
BJSC 3/8-G04B 3/8" G1/2
BJSC 1/2-G01B 1/2" G1/8
BJSC 1/2-G02B 1/2" G1/4
BJSC 1/2-G03B 1/2" G3/8
BJSC 1/2-G04B 1/2" G1/2


Coming soon

*Information contained herein may be changed without prior notification.