Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / PC 04-M4 | 4 mm Tube X M4 Thread Male Connector Push to Connect Fitting

Pneuflex PC 04-M4 composite push to connect fitting male connector allows to inlne connect 4 mm tube to female M4x0.7 threaded port in a “instantaneous” way without using tools. Nickel plated brass body helps resist abrasion, chemicals, and corrosion. Working pressure is up to 150 psi/10 bar. Working temperature is 32° to 140° F (0°C up to 6°C). 4 mm O.D tube x M4x0.7 thread push to connect male connector fitting is suitable for use with PU, nylon, or PE tubing. Use where fast assembly, disassembly, and reassembly are desired. Insert tube into brass push-in fitting up to the stop. By pressing the release collar and concurrent drawing of hose, the plastic tube can be dismounted again. After tube connection, it must be ensured that the hose does not undergo any tensile load and the minimum bending radius is respected.

PC 04-M4 | 4 mm Tube O.D X M4 Thread Male Connector | Push to Connect Fitting
Part NO.: PC 04-M4 
Push in Tubing O.D: 4mm
Thread Size: M4X0.7
Fluid Admitted: Air, Vacuum, Water (no freezing), Steam
Body Material: Nickel Plated Brass
Thread Material: Nickel Plated Brass
Thread Sealing: O-ring
Sealing and O-ring: NBR
Working Pressure: 0—1.0 MPa | 0—150.0 psi
Proof Pressure: 3.0 Mpa | 435 psi
Negative Pressure: -100 Kpa | -29.5 In Hg
Working Temperature: 0~60°C | 32~140°F
Lock Claw: Stainless Steel (SUS)
                                                     Applicable: PU / PA / PE / PVC

Dimensions of PC 04-M4x0.7 Push to Connect Fitting Male Connector

Dimensions of 4 mm Tube O.D X M4x0.7 Thread Male Connector | Push to Connect Fitting

Learn more about Pneuflex's Push to Connect Fittings >>