Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / PKD Male Triple Branch Reducer

Push to connect fitting triple male branch reducer is used to connect a tube to a female thread connection inline to three smaller tube connections at a right angle. Different from PKB, connection of two different tube diameter. Using manifold you can easily make a departure, for three tubes, from the main line. Tightening with a flat wrench. Triple male branch Reducer pneumatic fitting can be rotated after installation to allow for variations in piping direction. Pneumatic push to connect fitting triple male branch Reducer is made of nickel plated brass and strong thermoplastic (PBT) and has POM release sleeve, stainless steel tube gripping claw. Pre-coated Teflon threads are ready to use without additional sealing. Push to connect fittings are easy to install and release. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out.Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2". Thread sizes range from 1/8 NPT to 1/2 NPT.

All Pneuflex's push to connect fittings, push in fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Triple Male Branch Reducer, Push to Connect Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass and PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel (SUS)
   Release Sleeve POM
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Thread Standard and Type
UNF NPT-60° American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT

Inch Tube - NPT Thread

Part No. Push-in Tube ΦD1(Inch) Push-in Tube ΦD2(Inch) Thread (NPT)
PKD 1/4-5/32-N01 1/4" 5/32" 1/8 NPT
PKD 1/4-5/32-N02 1/4" 5/32" 1/4 NPT
PKD 5/16-1/4-N01 5/16" 1/4" 1/8 NPT
PKD 5/16-1/4-N02 5/16" 1/4" 1/4 NPT
PKD 5/16-1/4-N03 5/16" 1/4" 3/8 NPT
PKD 3/8-5/16-N01 3/8" 5/16" 1/8 NPT
PKD 3/8-5/16-N02 3/8" 5/16" 1/4 NPT
PKD 3/8-5/16-N03 3/8" 5/16" 3/8 NPT
PKD 1/2-3/8-N02 1/2" 3/8" 1/4 NPT
PKD 1/2-3/8-N03 1/2" 3/8" 3/8 NPT
PKD 1/2-3/8-N04 1/2" 3/8" 1/2 NPT

Metric Tube(mm) - NPT Thread

Part No. Push-in Tube ΦD1(mm) Push-in Tube ΦD2(mm) Thread (NPT)
PKD 06-04-N01 6mm 4mm 1/8 NPT
PKD 06-04-N02 6mm 4mm 1/4 NPT
PKD 08-06-N01 8mm 6mm 1/8 NPT
PKD 08-06-N02 8mm 6mm 1/4 NPT
PKD 08-06-N03 8mm 6mm 3/8 NPT
PKD 10-08-N01 10mm 8mm 1/8 NPT
PKD 10-08-N02 10mm 8mm 1/4 NPT
PKD 10-08-N03 10mm 8mm 3/8 NPT
PKD 12-10-N02 12mm 10mm 1/4 NPT
PKD 12-10-N03 12mm 10mm 3/8 NPT
PKD 12-10-N04 12mm 10mm 1/2 NPT

Documentation

Male Triple Branch Reducer, Push to Connect FittingsPKD Male Triple Branch Reducer
Part# ØD1 ØD2 B E A R F ØP H
PKD1/4-5/32-N01 1/4 5/32 64 19 7.5 1/8 NPT 35.8 13.4 7/16
PKD1/4-5/32-N02 1/4 5/32 68 19 10.5 1/4 NPT 35.8 13.4 9/16
PKD5/16-1/4-N01 5/16 1/4 71 20.2 7.5 1/8 NPT 42.8 15 1/2
PKD5/16-1/4-N02 5/16 1/4 75 20.2 10.5 1/4 NPT 42.8 15 9/16
PKD5/16-1/4-N03 5/16 1/4 76 20.2 11 3/8 NPT 42.8 15 11/16
PKD3/8-5/16-N01 3/8 5/16 87 23.8 7.5 1/8 NPT 49.6 18.8 9/16
PKD3/8-5/16-N02 3/8 5/16 90 23.8 10.5 1/4 NPT 49.6 18.8 9/16
PKD3/8-5/16-N03 3/8 5/16 91.5 23.8 11 3/8 NPT 49.6 18.8 11/16
PKD1/2-3/8-N02 1/2 3/8 105 29 10.5 1/4 NPT 59.6 21 7/8
PKD1/2-3/8-N03 1/2 3/8 106.5 29 11 3/8 NPT 59.6 21 7/8
PKD1/2-3/8-N04 1/2 3/8 112 29 14 1/2 NPT 59.6 21 7/8

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover