Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / PVG Union Elbow Reducer

Pneumatic fitting, push in fitting union elbow reducer connects two tubes with different tubing diameter on both ends at a 90° angle, can be used to change direction of tubing easily. All elbow push-in fittings are equipped with mounting holes. Union elbow reducer pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Union Elbow Reducer, Pneumatic Fittings, Push in Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel (SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD1(mm) Push-in Tube ΦD2(mm)
PVG 06-04 6mm 4mm
PVG 08-04 8mm 4mm
PVG 08-06 8mm 6mm
PVG 10-04 10mm 4mm
PVG 10-06 10mm 6mm
PVG 10-08 10mm 8mm
PVG 12-06 12mm 6mm
PVG 12-08 12mm 8mm
PVG 12-10 12mm 10mm

Inch Tube

Part No. Push-in Tube ΦD1(Inch) Push-in Tube ΦD2(Inch)
PVG 3/16-5/32 3/16" 5/32"
PVG 1/4-5/32 1/4" 5/32"
PVG 1/4-3/16 1/4" 3/16"
PVG 5/16-5/32 5/16" 5/32"
PVG 5/16-1/4 5/16" 1/4"
PVG 3/8-1/4 3/8" 1/4"
PVG 3/8-5/16 3/8" 5/16"
PVG 1/2-3/8 1/2" 3/8"

Documentation

Union Elbow Reducer, Pneumatic Fittings, Push in Fittings, One Touch FittingsPVG Elbow Reducer
Part# ØD1 ØD2 E ØP
PVG 06-04 6 4 19 13.4
PVG 08-04 8 4 23 15
PVG 08-06 8 6 23 15
PVG 10-06 10 6 27.5 18.8
PVG 10-08 10 8 27.5 18.8
PVG 12-06 12 6 29.5 21
PVG 12-08 12 8 29.5 21
PVG 12-10 12 10 29.5 21

 

Part# ØD1 ØD2 B ØP
PVG 1/4-5/32 1/4 5/32 19 13.4
PVG 5/16-1/4 5/16 1/4 23 15
PVG 3/8-5/16 3/8 5/16 27.5 18.8
PVG 1/2-3/8 1/2 3/8 29.5 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover