Pneumatic fitting, push in fitting tube cap is widely used to plug unused tubing. Pneumatic tube cap can be connected and disconnected very easily. Best solution for temporary blanking tubing in pneumatic system. Tube plug cap pneumatic push-to-connect fitting body is made of strong thermoplastic (PBT) and has stainless steel tube gripping claw. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8" to 1/2".
All Pneuflex's push-in fittings,pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
| || ||Fluid Admitted ||Air, Vacuum, Water (no freezing) |
| ||Working Pressure ||0—1.0 MPa | 0—150 psi |
| ||Proof Pressure ||3.0 Mpa | 435 psi |
| ||Negative Pressure ||-100 Kpa | -29.5 In Hg |
| ||Working Temperature ||0—60°C | 32～140°F |
| ||Applicable Tube ||PU / PA / PPF / PVC |
| ||Body ||PBT |
| ||Seal, O-ring ||NBR |
| ||Lock Claw ||Stainless Steel (SUS) |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |
Metric Tube (mm)
|Part No. ||Push-in Tube ΦD(mm) |
|PPF 04 ||4mm |
|PPF 05 ||5mm |
|PPF 06 ||6mm |
|PPF 08 ||8mm |
|PPF 09 ||9mm |
|PPF 10 ||10mm |
|PPF 12 ||12mm |
|PPF 14 ||14mm |
|PPF 15 ||15mm |
|PPF 16 ||16mm |
|Part No. ||Push-in Tube ΦD(Inch) |
|PPF 1/8 ||1/8" |
|PPF 5/32 ||5/32" |
|PPF 3/16 ||3/16" |
|PPF 1/4 ||1/4" |
|PPF 5/16 ||5/16" |
|PPF 3/8 ||3/8" |
|PPF 1/2 ||1/2" |