Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Plastic plug pneumatic fitting, push in fitting is used to be pushed into other push-in fitting to close any unnecessary opened connections. Plastic plug pneumatic push-to-connect fitting body is made of strong thermoplastic (PBT). Simple installation--push the plug in, and the connection is complete. To release the plug, press the release sleeve on the fitting, and you can easily pull the plug out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8" to 1/2".
 
Plastic Plug, Push-in Plug, Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD(mm)
PP 04 4mm
PP 05 5mm
PP 06 6mm
PP 08 8mm
PP 09 9mm
PP 10 10mm
PP 12 12mm
PP 14 14mm
PP 15 15mm
PP 16 16mm

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PP 1/8 1/8"
PP 5/32 5/32"
PP 3/16 3/16"
PP 1/4 1/4"
PP 5/16 5/16"
PP 3/8 3/8"
PP 1/2 1/2"

Documentation

PP Plug, Pneumatic Fittings, Push in Fittings, Push to Connect FittingsPP Plug
Part# ØD B ØP E
PP 04 4 35.5 11 11
PP 06 6 37 13.4 13.4
PP 08 8 40.5 15 15
PP 10 10 49.5 18.8 18.8
PP 12 12 52.5 21 21

 

Part# ØD B ØP E
PP 5/32 5/32 35.5 11 11
PP 1/4 1/4 37 13.4 13.4
PP 5/16 5/16 40.5 15 15
PP 3/8 3/8 49.5 18.8 18.8
PP 1/2 1/2 52.5 21 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover