Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Tube splicer is used to connect two push in fittings, pneumatic fittings with same diameter. simply push the tube splicer into the same size push in fittings, pneumatic fittings. Tube splicer pneumatic push to connect fitting bodies are made of strong thermoplastic (PBT). Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8" to 1/2".
Tube Splicer, Plastic Plug, Push-in Plug, Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel (SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD(mm)
PIJ 04 4mm
PIJ 05 5mm
PIJ 06 6mm
PIJ 08 8mm
PIJ 09 9mm
PIJ 10 10mm
PIJ 12 12mm
PIJ 14 14mm
PIJ 15 15mm
PIJ 16 16mm

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PIJ 1/8 1/8"
PIJ 5/32 5/32"
PIJ 3/16 3/16"
PIJ 1/4 1/4"
PIJ 5/16 5/16"
PIJ 3/8 3/8"
PIJ 1/2 1/2"

Crossover

Crossover