Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Pneumatic fitting, push in fitting union tee connects three tubes with same diameter  at a 90° angle. Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push-in fittings,pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Union Tee, Plastic Push in Fittings, Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD(mm)
PE 04 4mm
PE 05 5mm
PE 06 6mm
PE 08 8mm
PE 09 9mm
PE 10 10mm
PE 12 12mm
PE 14 14mm
PE 15 15mm
PE 16 16mm

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PE 1/8 1/8"
PE 5/32 5/32"
PE 3/16 3/16"
PE 1/4 1/4"
PE 5/16 5/16"
PE 3/8 3/8"
PE 1/2 1/2"

Documentation

Union Tee, Pneumatic Fittings, Push in FittingsPE Union Tee
Part# ØD B ØP E
PE 04 4 36.5 11 18
PE 06 6 38.5 13.4 19
PE 08 8 45.5 15 23
PE 10 10 56 18.8 28
PE 12 12 58.5 21 39.5
PE 14 14 63 26 31
PE 15 15 63 26 31
PE 16 16 63 26 31

 

Part# ØD B ØP E
PE 1/8 1/8 36 11 18
PE 5/32 5/32 36.5 11 18
PE 1/4 1/4 38.5 13.4 19
PE 5/16 5/16 45.5 15 23
PE 3/8 3/8 56 18.8 28
PE 1/2 1/2 58.5 21 39.5

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover