Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Pneumatic grey type push in fitting, pneumatic fitting, push to connect fitting plug-in Y reducer is used to connect two tube connections on one end and a plug-in stem to push in another pneumatic fitting on the other end in same direction, allows to split fluid directly from a push-in fitting. The tube size of two tube connection is smaller than the plug-in stem. Plug-in Y reducer push in fitting, pneumatic fitting, push to connect fitting bodies are made of nickel plated brass and strong grey color thermoplastic (PBT), POM release sleeve and have stainless steel tube gripping claws. Simple installation--push the tubing or stem in, and the connection is complete. To release the tubing or stem, press the release sleeve on the fitting, and you can easily pull the tube or stem out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Plug-in Y Reducer, Pneumatic Fittings, Push in Fittings, Push to Connect Fittings   Fluid Admitted Air, Vacuum, Water (no freezing)
  Working Pressure 0—1.0 MPa | 0—150 psi
  Proof Pressure 3.0 Mpa | 435 psi
  Negative Pressure -100 Kpa | -29.5 In Hg
  Working Temperature 0—60°C | 32~140°F
  Applicable Tube PU / PA / PE / PVC
  Body Nickel Plated Brass and PBT
  Seal, O-ring NBR
  Lock Claw Stainless Steel (SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD1(mm) Push-in Tube ΦD2(mm)
WPWJ 06-04 6mm 4mm
WPWJ 08-04 8mm 4mm
WPWJ 08-06 8mm 6mm
WPWJ 10-04 10mm 4mm
WPWJ 10-06 10mm 6mm
WPWJ 10-08 10mm 8mm
WPWJ 12-06 12mm 6mm
WPWJ 12-08 12mm 8mm
WPWJ 12-10 12mm 10mm

Inch Tube

Part No. Push-in Tube ΦD1(Inch) Push-in Tube ΦD2(Inch)
WPWJ 3/16-5/32 3/16" 5/32"
WPWJ 1/4-5/32 1/4" 5/32"
WPWJ 1/4-3/16 1/4" 3/16"
WPWJ 5/16-5/32 5/16" 5/32"
WPWJ 5/16-1/4 5/16" 1/4"
WPWJ 3/8-1/4 3/8" 1/4"
WPWJ 3/8-5/16 3/8" 5/16"
WPWJ 1/2-3/8 1/2" 3/8"

Documentation

Plug-in Y Reducer, Push in Fittings, Pneumatic Fittings, Push to Connect Fittings, One Touch Fittings
Part# ØD1 ØD2 B ØP E A
WPWJ 06-04 4 6 50 11 11 6
WPWJ 08-04 4 8 53 11 11 6
WPWJ 08-06 6 8 54.5 13.4 13.4 6
WPWJ 10-06 6 10 57.5 13.4 13.4 6
WPWJ 10-08 8 10 61 15 15 8
WPWJ 12-08 8 12 61 15 15 8
WPWJ 12-10 10 12 69.5 18.8 18.8 8

 

Part# ØD1 ØD2 B ØP E A
WPWJ 1/4-5/32 5/32 1/4 50 11 11 6
WPWJ 5/16-3/16 3/16 5/16 53 11 11 6
WPWJ 5/16-1/4 1/4 5/16 54.5 13.4 13.4 6
WPWJ 3/8-1/4 1/4 3/8 57.5 13.4 13.4 6
WPWJ 3/8-5/16 5/16 3/8 61 15 15 8
WPWJ 1/2-5/16 5/16 1/2 61 15 15 8
WPWJ 1/2-3/8 3/8 1/2 69.5 18.8 18.8 8

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover