Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Pneuflex grey type push in fitting, pneumatic fitting, push to connect fitting unequal union tee reducer is designed to connect three tubes with size down in both 90° directions. The tubing size in the middle is smaller than the two inline tubes. Union tee reducer push in fitting, pneumatic fitting, push to connect fitting bodies are made of strong grey color thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push-in fittings, pneumatic fittings, push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Union Tee Reducer, Pneumatic Fittings, Push in Fittings, Push to Connect Fittings   Fluid Admitted Air, Vacuum, Water (no freezing)
  Working Pressure 0—1.0 MPa | 0—150 psi
  Proof Pressure 3.0 Mpa | 435 psi
  Negative Pressure -100 Kpa | -29.5 In Hg
  Working Temperature 0—60°C | 32~140°F
  Applicable Tube PU / PA / PE / PVC
  Body PBT
  Seal, O-ring NBR
  Lock Claw Stainless Steel (SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD1(mm) Push-in Tube ΦD2(mm)
WPEG 06-04 6mm 4mm
WPEG 08-04 8mm 4mm
WPEG 08-06 8mm 6mm
WPEG 10-04 10mm 4mm
WPEG 10-06 10mm 6mm
WPEG 10-08 10mm 8mm
WPEG 12-06 12mm 6mm
WPEG 12-08 12mm 8mm
WPEG 12-10 12mm 10mm

Inch Tube

Part No. Push-in Tube ΦD1(Inch) Push-in Tube ΦD2(Inch)
WPEG 3/16-5/32 3/16" 5/32"
WPEG 1/4-5/32 1/4" 5/32"
WPEG 1/4-3/16 1/4" 3/16"
WPEG 5/16-5/32 5/16" 5/32"
WPEG 5/16-1/4 5/16" 1/4"
WPEG 3/8-1/4 3/8" 1/4"
WPEG 3/8-5/16 3/8" 5/16"
WPEG 1/2-3/8 1/2" 3/8"

Documentation

Union Tee Reducer, Push in Fittings, Pneumatic Fittings, Push to Connect Fittings
Part# ØD1 ØD2 B ØP E
WPEG 06-04 6 4 38.5 13.4 19
WPEG 08-06 8 6 45.5 15 23
WPEG 10-08 10 8 56 18.8 28
WPEG 12-10 12 10 58.5 21 39.5

 

Part# ØD1 ØD2 B ØP E
WPEG 1/4-5/32 1/4 5/32 38.5 13.4 19
WPEG 5/16-1/4 5/16 1/4 45.5 15 23
WPEG 3/8-5/16 3/8 5/16 56 18.8 28
WPEG 1/2-3/8 1/2 3/8 58.5 21 39.5

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover