Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Pneuflex grey type Pneumatic fitting, push in fitting, push to connect fitting union tee connect two tubes at 90-degree angles to a third tube with same tube diameter. Union tee push-to-connect fitting bodies are made of strong grey color thermoplastic (PBT) and have stainless steel tube gripping claws offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8" to 1/2". This grey type Pneumatic fitting, push in fitting, push to connect fitting union tee is suitable for use in air, water, oil, chemical applications.

All Pneuflex's push-in fittings, pneumatic fittings push to connect fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Union Tee, Push in Fittings, Pneumatic Fittings, Push to Connect Fittings   Fluid Admitted Air, Vacuum, Water (no freezing)
  Working Pressure 0—1.0 MPa | 0—150 psi
  Proof Pressure 3.0 Mpa | 435 psi
  Negative Pressure -100 Kpa | -29.5 In Hg
  Working Temperature 0—60°C | 32~140°F
  Applicable Tube PU / PA / PE / PVC
  Body PBT
  Seal, O-ring NBR
  Lock Claw Stainless Steel (SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Metric Tube (mm)

Part No. Push-in Tube ΦD(mm)
WPE 04 4mm
WPE 05 5mm
WPE 06 6mm
WPE 08 8mm
WPE 09 9mm
WPE 10 10mm
WPE 12 12mm
WPE 14 14mm
WPE 15 15mm
WPE 16 16mm

Inch Tube

Part No. Push-in Tube ΦD(Inch)
WPE 1/8 1/8"
WPE 5/32 5/32"
WPE 3/16 3/16"
WPE 1/4 1/4"
WPE 5/16 5/16"
WPE 3/8 3/8"
WPE 1/2 1/2"

Documentation

Union Tee, Pneumatic Fittings, Push in Fittings, Push to Connect Fittings
Part# ØD B ØP E
WPE 04 4 36.5 11 18
WPE 06 6 38.5 13.4 19
WPE 08 8 45.5 15 23
WPE 10 10 56 18.8 28
WPE 12 12 58.5 21 39.5
WPE 14 14 63 26 31
WPE 15 15 63 26 31
WPE 16 16 63 26 31

 

Part# ØD B ØP E
WPE 1/8 1/8 36 11 18
WPE 5/32 5/32 36.5 11 18
WPE 1/4 1/4 38.5 13.4 19
WPE 5/16 5/16 45.5 15 23
WPE 3/8 3/8 56 18.8 28
WPE 1/2 1/2 58.5 21 39.5

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover