Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Push to connect fitting union cross is used to connect four tubes with same diameter in all 90°. Union cross pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate inch tubing O.D ranging from 1/8" to 1/2".
 
All Pneuflex's push to connect fittings, pneumatic fittings, push in fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Union Cross, Push to Connect Fittings, Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel (SUS)
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PZA 1/8 1/8"
PZA 5/32 5/32"
PZA 3/16 3/16"
PZA 1/4 1/4"
PZA 5/16 5/16"
PZA 3/8 3/8"
PZA 1/2 1/2"

Documentation

Union Cross, Push to Connect FittingsPZA Union Cross
Part# ØD B ØP E
PZA 5/32 5/32 35.5 11 11
PZA 1/4 1/4 37 13.4 13.4
PZA 5/16 5/16 40.5 15 15
PZA 3/8 3/8 49.5 18.8 18.8
PZA 1/2 1/2 52.5 21 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover