Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Push to connect fitting union elbow connects two tubes of equal tube ΦD at a 90° angle. Accommodate inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push to connect fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Union Elbow, Push to Connect Fittings, Plastic Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PV 1/8 1/8"
PV 5/32 5/32"
PV 3/16 3/16"
PV 1/4 1/4"
PV 5/16 5/16"
PV 3/8 3/8"
PV 1/2 1/2"

Documentation

Union Elbow, Pushi to Connect FittingsPV Union Elbow

 

Part# ØD B ØP
PV 1/8 1/8 17.5 11
PV 5/32 5/32 18 11
PV 3/16 3/16 19 13.4
PV 1/4 1/4 19 13.4
PV 5/16 5/16 23 15
PV 3/8 3/8 27.5 18.8
PV 1/2 1/2 29.5 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover