Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Plastic plug is used to push into push to connect fitting, thus shut this unused push to connect fitting. Plastic plug pneumatic push-to-connect fitting is made of a strong thermoplastic (PBT). Simple installation--push the plug in, and the connection is complete. To release the plug, press the release sleeve on the fitting, and you can easily pull the plug out. Accommodate inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push to connect fittings, pneumatic fittings, push in fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Plastic Plug, Push-in Plug, Push to Connect Fittings, Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PP 1/8 1/8"
PP 5/32 5/32"
PP 3/16 3/16"
PP 1/4 1/4"
PP 5/16 5/16"
PP 3/8 3/8"
PP 1/2 1/2"

Documentation

Plug | Plastic Plug | Push to Connect  Fittings | Push in FittingsPP Plug
Part# ØD B ØP E
PP 5/32 5/32 35.5 11 11
PP 1/4 1/4 37 13.4 13.4
PP 5/16 5/16 40.5 15 15
PP 3/8 3/8 49.5 18.8 18.8
PP 1/2 1/2 52.5 21 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover