Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Plug-in elbow connects tubing at a 90° angle to a push to connect fitting or cartridge. Useful on pneumatic control valves or cylinders equipped with cartridges. Accommodate inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push to connect fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Plug-in Elbow, Push to Connect Fittings,  Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass & PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PLJ 1/8 1/8"
PLJ 5/32 5/32"
PLJ 3/16 3/16"
PLJ 1/4 1/4"
PLJ 5/16 5/16"
PLJ 3/8 3/8"
PLJ 1/2 1/2"

Documentation

Plug-in Elbow, Push to Connect FittingsPLJ Plug-in Elbow
Part# ØD E B ØP
PLJ 5/32 5/32 18 33 11
PLJ 1/4 1/4 19 36.2 13.4
PLJ 5/16 5/16 23 42.5 15
PLJ 3/8 3/8 27.5 50.8 18.8
PLJ 1/2 1/2 29.6 54.5 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover