Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Tube Splicer is used to connect two same external diameter push to fittings, pneumatic fittings, push in fittings. Accommodate inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push to connect fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Plastic Tube Splicer, Push to Connect Fittings, Pneumatic Fittings    Fluid Admitted Air, Vaccum, Water(no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   APIJlicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD(Inch)
PIJ 1/8 1/8"
PIJ 5/32 5/32"
PIJ 3/16 3/16"
PIJ 1/4 1/4"
PIJ 5/16 5/16"
PIJ 3/8 3/8"
PIJ 1/2 1/2"

Documentation

Tube Splicer, Push to Connect Fittings, Push in Fittings
Part# ØD B ØP E
PIJ 04 4 35.5 11 11
PIJ 06 6 37 13.4 13.4
PIJ 08 8 40.5 15 15
PIJ 10 10 49.5 18.8 18.8
PIJ 12 12 52.5 21 21

 

Part# ØD B ØP E
PIJ 5/32 5/32 35.5 11 11
PIJ 1/4 1/4 37 13.4 13.4
PIJ 5/16 5/16 40.5 15 15
PIJ 3/8 3/8 49.5 18.8 18.8
PIJ 1/2 1/2 52.5 21 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover