Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Plug-in reducer is used to connect tubing with anther push to connect fittings or pneumatic fittings. Simply push tubing on one side, and the stem is supposed to be pushed into another push to connect fitting. Accommodate inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push to connect fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Plug-in Reducer, Push to Connect Fittings, Pneumatic Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)

 

Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD1(Inch) Push-in Tube ΦD2(Inch)
PGJ 3/16-5/32 3/16" 5/32"
PGJ 1/4-5/32 1/4" 5/32"
PGJ 1/4-3/16 1/4" 3/16"
PGJ 5/16-5/32 5/16" 5/32"
PGJ 5/16-1/4 5/16" 1/4"
PGJ 3/8-1/4 3/8" 1/4"
PGJ 3/8-5/16 3/8" 5/16"
PGJ 1/2-3/8 1/2" 3/8"

Documentation

Plug-in Reducer, Push to Connect Fittings, Push in FittingsPGJ Plug-in Reducer

 

Part# ØD2 E ØD B A ØP
PGJ 1/4-5/32 5/32 17 1/4 41 6 10
PGJ 5/16-5/32 5/32 20 5/16 44 6 10
PGJ 5/16-1/4 1/4 20 5/16 45 6 12
PGJ 3/8-1/4 1/4 23 3/8 47 8 12
PGJ 3/8-5/16 5/16 23 3/8 47 8 14
PGJ 1/2-5/16 5/16 23 1/2 54 8 14
PGJ 1/2-3/8 3/8 23 1/2 54 8 17

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover