Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / PIG Tube Splicer Reducer

Tube splicer reducer connects unequal tube diameter push to connect fittings, pneumatic fittings, push in fittings. simply push the tube splicer into the different size push to connect fittings, pneumatic fittings. Tube splicer reducer pneumatic push-to-connect fitting bodies are made of a strong thermoplastic (PBT). Accommodate inch tubing O.D ranging from 1/8" to 1/2".

All Pneuflex's push to connect fittings, push in fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Tube Splicer Reducer, Pneumatic Fittings, Push to Connect Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"

Inch Tube

Part No. Push-in Tube ΦD1(Inch) Push-in Tube ΦD2(Inch)
PIG 3/16-5/32 3/16" 5/32"
PIG 1/4-5/32 1/4" 5/32"
PIG 1/4-3/16 1/4" 3/16"
PIG 5/16-5/32 5/16" 5/32"
PIG 5/16-1/4 5/16" 1/4"
PIG 3/8-1/4 3/8" 1/4"
PIG 3/8-5/16 3/8" 5/16"
PIG 1/2-3/8 1/2" 3/8"

Documentation

Tube Splicer Reducer, Push to Connect Fittings
Part# ØD1 ØD2 B ØP
PIG 1/4-5/32 1/4 5/32 19 13.4
PIG 5/16-1/4 5/16 1/4 23 15
PIG 3/8-5/16 3/8 5/16 27.5 18.8
PIG 1/2-3/8 1/2 3/8 29.5 21

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover