Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / HVSS-G Male G, BSPP Thread Straight

Hand valves, shut off valves are designed to turn on and off the airflow, this thread to thread hand valve connects two G, BSP, BSPP female threaded port on both end. Hand valve should only be connected according to the arrow on the body. In the open position air flows from input to output for both two way directional hand valve and three way directional hand valve. In closed position the input air flow is blocked completely for two way directional hand valve, and air downstream from three way directional hand valve will be exhausted to atmosphere. Accommodate metric tubing O.D ranging from 6 mm to 12 mm, inch tube ranging from 1/4" to 1/2", thread sizes range is from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.

To open the hand valve, shut off valve, turn the cap lever 90 degrees in the clockwise direction until it stops. To close the hand valve, shut off valve, turn the cap lever 90 degrees in the counterclockwise direction until it stops. As for three-directional control valve, the residual pressure in outlet side is released from the gap between cap lever and body just after closing the valve

Male G, BSPP Thread Straight Hand Valves, Shut off Valves   Fluid Admitted Air,Vacuum
  Working Pressure 0—1.0 MPa |0—150 psi
  Negative Pressure -100 Kpa | -29.5 In Hg
  Working Temperature -0—60°C | 32~140°F
  Applicable Tube PU / PA / Teflon Tubing
  Body Nickel Plated Brass and PBT
  Seal, O-ring NBR
 
Metric Tube ØD
6mm 8mm 10mm 12mm
 
Inch Tube ØD
1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
BSPP, G -- 55° Taper Pipe Thread
G1/8 G1/4 G3/8 G1/2

Hand Valves, Shut off Valves -- HVSS-G Male BSPP, G Thread StraightHVSS-G Thread-Thread Straight, Hand Valves, Shut Off Valves
Part No. E B R1 R2 A1 A2 H1 H2
Two Ways Three Ways
HVSS G01-G01B HVSS G01-G01 60 41.5 G1/8 G1/8 5.5 5.5 14 14
HVSS G02-G01B HVSS G02-G01 64 41.5 G1/4 G1/8 7.5 5.5 17 14
HVSS G02-G02B HVSS G02-G02 63 41.5 G1/4 G1/4 7.5 7.5 17 17
HVSS G03-G02B HVSS G03-G02 80 46 G3/8 G1/4 8.5 7.5 20 17
HVSS G03-G03B HVSS G02-G03 81 46 G3/8 G3/8 8.5 8.5 20 20
HVSS G04-G03B HVSS G04-G03 87 46 G1/2 G3/8 11 8.5 24 20
HVSS G04-G04B HVSS G04-G04 90 46 G1/2 G1/2 11 11 24 24