Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / HVSF-G BSPP,G Thread to Tube Straight

Hand valves, shut off valves are designed to turn on and off the airflow, this thread to tube hand valve connects a G, BSP, BSPP female threaded port on one end and a pneumatic tubing on other end. Hand valve should only be connected according to the arrow on the body. In the open position air flows from input to output for both two way directional hand valve and three way directional hand valve. In closed position the input air flow is blocked completely for two way directional hand valve, and air downstream from three way directional hand valve will be exhausted to atmosphere. Accommodate metric tubing O.D ranging from 6 mm to 12 mm, inch tube ranging from 1/4" to 1/2", thread sizes range is from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2

To open the hand valve, shut off valve, turn the cap lever 90 degrees in the clockwise direction until it stops.

To close the hand valve, shut off valve, turn the cap lever 90 degrees in the counterclockwise direction until it stops. As for three-directional control valve, the residual pressure in outlet side is released from the gap between cap lever and body just after closing the valve

G Thread to Tube Straight Hand Valves, Shut-off Valves   Fluid Admitted Air,Vacuum
  Working Pressure 0—1.0 MPa |0—150 psi
  Negative Pressure -100 Kpa | -29.5 In Hg
  Working Temperature -0—60°C | 32~140°F
  Applicable Tube PU / PA / Teflon Tube
  Body Nickel Plated Brass and PBT
  Seal, O-ring NBR
 
Metric Tube ØD
6mm 8mm 10mm 12mm
 
Inch Tube ØD
1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
BSPP, G -- 55° Taper Pipe Thread
G1/8 G1/4 G3/8 G1/2

Hand Valves, Shut-off Valves -- HVSF-G Thread to Tube StraightHVSF-G Thread - Tube Straight, Hand Valves, Shut Off Valves
Part No. ΦD(mm) E B ΦP A R H
Two Ways Three Ways
HVSF G01-06B HVSF G01-06 6mm 56.2 41.5 14.8 5.5 G1/8 14
HVSF G02-06B HVSF G02-06 6mm 58.8 41.5 14.8 7.5 G1/4 17
HVFS G03-06B HVSF G02-06 6mm 61 41.5 14.8 8.5 G3/8 20
HVSF G01-08B HVSF G01-08 8mm 57.2 41.5 14.8 5.5 G1/8 14
HVSF G02-08B HVSF G02-08 8mm 59.2 41.5 14.8 7.5 G1/4 17
HVSF G03-08B HVSF G02-08 8mm 61.5 41.5 14.8 8.5 G3/8 20
HVSF G02-10B HVSF G02-10 10mm 71.3 46 21 7.5 G1/4 17
HVSF G03-10B HVSF G03-10 10mm 72.2 46 21 8.5 G3/8 20
HVSF G04-10B HVSF G04-10 10mm 75.2 46 21 11 G1/2 24
HVSF G02-12B HVSF G02-12 12mm 71.6 46 21 7.5 G1/4 17
HVSF G03-12B HVSF G03-12 12mm 72.5 46 21 8.5 G3/8 20
HVSF G04-12B HVSF G04-12 12mm 75.5 46 21 11 G1/2 24

 

Save