Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

Push in fitting with O-ring male Y is used to connect two tubings in the same direction from female threaded port. The G, BSP, BSPP thread is offered in a straight (parallel) form, the thread features a 55° flank angle. Fittings with male BSPP thread use a primary sealing method of an O-ring and retaining ring. Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8" to 1/2". External tightening with a flat wrench. Thread sizes range from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.

All Pneuflex's push-in fittings, pneumatic fittings can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Push-in Male Y, Push-in Fittings, Pneumatic Air Fittings   Fluid Admitted Air, Vacuum, Water (no freezing)
  Working Pressure 0—1.0MPa | 0—150psi
  Proof Pressure 3.0Mpa | 435psi
  Negative Pressure -100Kpa | -29.5 In Hg
  Working Temperature 0—60°C | 32~140°F
  Applicable Tube PU / PA / PE / PVC
  Body Nickel Plated Brass & PBT
  Seal, O-ring NBR
  Lock Claw Stainless Steel(SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
BSPP, G -- 55° Taper Pipe Thread
G1/8 G1/4 G3/8 G1/2

Metric Tube (mm)- BSPP, G Thread

Part No. Push-in Tube ΦD(mm) Thread (BSPP, G)
WPX 04-G01 4mm G1/8
WPX 04-G02 4mm G1/4
WPX 06-G01 6mm G1/8
WPX 06-G02 6mm G1/4
WPX 06-G03 6mm G3/8
WPX 06-G04 6mm G1/2
WPX 08-G01 8mm G1/8
WPX 08-G02 8mm G1/4
WPX 08-G03 8mm G3/8
WPX 08-G04 8mm G1/2
WPX 10-G01 10mm G1/8
WPX 10-G02 10mm G1/4
WPX 10-G03 10mm G3/8
WPX 10-G04 10mm G1/2
WPX 12-G01 12mm G1/8
WPX 12-G02 12mm G1/4
WPX 12-G03 12mm G3/8
WPX 12-G04 12mm G1/2
WPX 14-G02 14mm G1/4
WPX 14-G03 14mm G3/8
WPX 14-G04 14mm G1/2
WPX 15-G02 15mm G1/4
WPX 15-G03 15mm G3/8
WPX 15-G04 15mm G1/2
WPX 16-G02 16mm G1/4
WPX 16-G03 16mm G3/8
WPX 16-G04 16mm G1/2

Inch Tube - BSPP, G Thread

Part No. Push-in Tube ΦD(Inch) Thread (BSPP, G)
WPX 1/8-G01 1/8" G1/8
WPX 1/8-G02 1/8" G1/4
WPX 5/32-G01 5/32" G1/8
WPX 5/32-G02 5/32" G1/4
WPX 3/16-G01 3/16" G1/8
WPX 3/16-G02 3/16" G1/4
WPX 3/16-G03 3/16" G3/8
WPX 1/4-G01 1/4" G1/8
WPX 1/4-G02 1/4" G1/4
WPX 1/4-G03 1/4" G3/8
WPX 1/4-G04 1/4" G1/2
WPX 5/16-G01 5/16" G1/8
WPX 5/16-G02 5/16" G1/4
WPX 5/16-G03 5/16" G3/8
WPX 5/16-G04 5/16" G1/2
WPX 3/8-G01 3/8" G1/8
WPX 3/8-G02 3/8" G1/4
WPX 3/8-G03 3/8" G3/8
WPX 3/8-G04 3/8" G1/2
WPX 1/2-G01 1/2" G1/8
WPX 1/2-G02 1/2" G1/4
WPX 1/2-G03 1/2" G3/8
WPX 1/2-G04 1/2" G1/2

Documentation

Male Y, One Touch Fitting with O-ring, Push in Fitting with O-ring
Part# ØD E B ØP A G H
WPX 04-G01 4 11 41 11 5.5 G1/8 14
WPX 04-G02 4 11 43 11 7.5 G1/4 17
WPX 06-G01 6 13.4 43 13.4 5.5 G1/8 14
WPX 06-G02 6 13.4 46 13.4 7.5 G1/4 17
WPX 06-G03 6 13.4 47 13.4 8.5 G3/8 20
WPX 06-G04 6 13.4 51 13.4 11 G1/2 24
WPX 08-G01 8 15 46 15 5.5 G1/8 14
WPX 08-G02 8 15 49 15 7.5 G1/4 17
WPX 08-G03 8 15 51 15 8.5 G3/8 20
WPX 08-G04 8 15 54 15 11 G1/2 24
WPX 10-G01 10 18.8 60 18.8 5.5 G1/8 17
WPX 10-G02 10 18.8 63 18.8 7.5 G1/4 17
WPX10-G03 10 18.8 64 18.8 8.5 G3/8 20
WPX 10-G04 10 18.8 65 18.8 11 G1/2 24
WPX 12-G01 12 21 65 21 5.5 G1/8 20
WPX 12-G02 12 21 68 21 7.5 G1/4 20
WPX 12-G03 12 21 70 21 8.5 G3/8 20
WPX 12-G04 12 21 72 21 11 G1/2 24

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover