Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / DOTPZA Male Cross

D.O.T Push in tube male cross with one NPT male end opposite one another and three ends opposite one another for connecting same diameter tubes. Accommodate inch tubing O.D ranging from 1/8" to 1/2". This D.O.T. fitting meets Department of Transportation (DOT) FMVSS 571.106 technical specifications. External tightening with a flat wrench.
 
Male Cross, D.O.T. Push in Tube Fittings, Air Brake Fittings    Fluid Admitted Air, Vacuum
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature -40—100°C | -40~220°F
   Applicable Tube PU / PA
   Body Brass/Forged Brass
   Seal, O-ring FKM(Viton)
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
UNF NPT-60° American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT

Inch Tube - NPT Thread

Part No. Push-in Tube ΦD(Inch) Thread (NPT)
DOTPZA 1/8-U10 1/8" 10-32 UNF
DOTPZA 1/8-N01 1/8" 1/8 NPT
DOTPZA 1/8-N02 1/8" 1/4 NPT
DOTPZA 5/32-U10 5/32" 10-32 UNF
DOTPZA 5/32-N01 5/32" 1/8 NPT
DOTPZA 5/32-N02 5/32" 1/4 NPT
DOTPZA 3/16-U10 3/16" 10-32 UNF
DOTPZA 3/16-N01 3/16" 1/8 NPT
DOTPZA 3/16-N02 3/16" 1/4 NPT
DOTPZA 3/16-N03 3/16" 3/8 NPT
DOTPZA 1/4-U10 1/4" 10-32 UNF
DOTPZA 1/4-N01 1/4" 1/8 NPT
DOTPZA 1/4-N02 1/4" 1/4 NPT
DOTPZA 1/4-N03 1/4" 3/8 NPT
DOTPZA 1/4-N04 1/4" 1/2 NPT
DOTPZA 5/16-N01 5/16" 1/8 NPT
DOTPZA 5/16-N02 5/16" 1/4 NPT
DOTPZA 5/16-N03 5/16" 3/8 NPT
DOTPZA 5/16-N04 5/16" 1/2 NPT
DOTPZA 3/8-N01 3/8" 1/8 NPT
DOTPZA 3/8-N02 3/8" 1/4 NPT
DOTPZA 3/8-N03 3/8" 3/8 NPT
DOTPZA 3/8-N04 3/8" 1/2 NPT
DOTPZA 1/2-N01 1/2" 1/8 NPT
DOTPZA 1/2-N02 1/2" 1/4 NPT
DOTPZA 1/2-N03 1/2" 3/8 NPT
DOTPZA 1/2-N04 1/2" 1/2 NPT

Crossover

Crossover