Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / DOTPV Union Elbow

D.O.T. push in tube union elbow connects two tubes of equal diameter at a 90 degree angle. It has push-to-connect tube connections on both ends. When installing, ensure tubing ends are cut squarely and free from burrs; to remove, hold down the top of the insert against the fitting body then pull out the tubing. This D.O.T push to connect fitting meets Department of Transportation (DOT) FMVSS 571.106 technical specifications. These D.O.T push in fittings are intended for use in pneumatic circuits for truck and trailers : air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories. Accommodate inch tubing O.D ranging from 5/32" to 1/2".
 
  1. Simple tube connection and disconnection - no tools required
  2. Reduced assembly & maintenance times provide time/labor savings
  3. Reusable: Can be connected and disconnected several times
 
Union Elbow , D.O.T  Push in Tube Fittings, Air Brake Fittings    Fluid Admitted Air, Vacuum
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature -40—100°C | -40~220°F
   Applicable Tube PU / PA 
   Body Brass/Forged Brass
   Seal, O-ring FKM (Viton)
 
 
Inch Tube ØD
5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 

Inch Tube

Part No. Push-in Tube ΦD(Inch)
DOTPV 5/32 5/32"
DOTPV 3/16 3/16"
DOTPV 1/4 1/4"
DOTPV 5/16 5/16"
DOTPV 3/8 3/8"
DOTPV 1/2 1/2"

Crossover

Crossover