Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.
/ / / DOTPLN Male Elbow

D.O.T push in tube fitting male elbow has a push-to-connect tube connection on one end and a pre-coated male National Pipe Taper (NPT) thread on the other end for connecting to female threaded pipes at 90-degree angles. This D.O.T. push in air break male elbow has a fixed thread. When installing, ensure tubing ends are cut squarely and free from burrs; to remove, hold down the top of the insert against the fitting body then pull out the tubing. This D.O.T push to connect fitting meets Department of Transportation (DOT) FMVSS 571.106 technical specifications. These D.O.T push in fittings are intended for use in pneumatic circuits for truck and trailers : air suspension, braking systems, transmissions, locking doors and windows, seat adjustment, instrumentation, air conditioning systems, horn, wiper motors, valves, cylinders and accessories. Accommodate inch tubing O.D ranging from 5/32" to 1/2". Thread sizes range is from 10-32 UNF, 1/8 NPT to 1/2 NPT.
 
  1. Simple tube connection and disconnection - no tools required
  2. Reduced assembly & maintenance times provide time/labor savings
  3. Reusable: Can be connected and disconnected several times
 
Male Elbow, D.O.T Push in Tube Fittings, Air Brake Fittings    Fluid Admitted Air, Vacuum
   Working Pressure 0—1.0 MPa | 0—150 psi
   Proof Pressure 3.0 Mpa | 435 psi
   Negative Pressure -100 Kpa | -29.5 In Hg
   Working Temperature -40—100°C | -40~220°F
   Applicable Tube PU / PA
   Body Brass/Forged Brass
   Seal, O-ring FKM (Viton)
 
Inch Tube ØD
5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
UNF NPT-60° American Standard Taper Pipe Thread
10-32 UNF 1/8 NPT 1/4 NPT 3/8 NPT 1/2 NPT

Inch Tube - NPT Thread

Part No. Push-in Tube ΦD(Inch) Thread (NPT)
DOTPLN 5/32-U10 5/32" 10-32 UNF
DOTPLN 5/32-N01 5/32" 1/8 NPT
DOTPLN 5/32-N02 5/32" 1/4 NPT
DOTPLN 3/16-U10 3/16" 10-32 UNF
DOTPLN 3/16-N01 3/16" 1/8 NPT
DOTPLN 3/16-N02 3/16" 1/4 NPT
DOTPLN 3/16-N03 3/16" 3/8 NPT
DOTPLN 1/4-U10 1/4" 10-32 UNF
DOTPLN 1/4-N01 1/4" 1/8 NPT
DOTPLN 1/4-N02 1/4" 1/4 NPT
DOTPLN 1/4-N03 1/4" 3/8 NPT
DOTPLN 1/4-N04 1/4" 1/2 NPT
DOTPLN 5/16-N01 5/16" 1/8 NPT
DOTPLN 5/16-N02 5/16" 1/4 NPT
DOTPLN 5/16-N03 5/16" 3/8 NPT
DOTPLN 5/16-N04 5/16" 1/2 NPT
DOTPLN 3/8-N01 3/8" 1/8 NPT
DOTPLN 3/8-N02 3/8" 1/4 NPT
DOTPLN 3/8-N03 3/8" 3/8 NPT
DOTPLN 3/8-N04 3/8" 1/2 NPT
DOTPLN 1/2-N01 1/2" 1/8 NPT
DOTPLN 1/2-N02 1/2" 1/4 NPT
DOTPLN 1/2-N03 1/2" 3/8 NPT
DOTPLN 1/2-N04 1/2" 1/2 NPT

Crossover

Crossover