Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

D.O.T. push in tube fitting union tee connects two tubes of equal or unequal diameters at a 90-degree angle to a third tube. It has push-to-connect tube connections on all three ends. This D.O.T. fitting meets Department of Transportation (DOT) FMVSS 571.106 technical specifications. Accommodate inch tubing O.D ranging from 1/8" to 1/2".
 
Union Tee, D.O.T.  Push in Tube Fittings, Air Brake Fittings    Fluid Admitted Air, Vacuum
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature -40—100°C | -40~220°F
   Applicable Tube PU / PA 
   Body Brass/Forged Brass
   Seal, O-ring FKM(Viton)
 
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 

Inch Tube

Part No. DOTPEsh-in Tube ΦD(Inch)
DOTPE 1/8 1/8"
DOTPE 5/32 5/32"
DOTPE 3/16 3/16"
DOTPE 1/4 1/4"
DOTPE 5/16 5/16"
DOTPE 3/8 3/8"
DOTPE 1/2 1/2"

Crossover

Crossover