BSPP, G thread one touch tube fitting with o-ring triple male branch reducer is used to connect a tube to a female threaded connection inline to three smaller tube connections at a right angle. Different from PKB, connection of two different tube diameter. Using manifold you can easily make a departure, for three tubes, from the main line. BSPP, G thread one touch tube fitting with o-ring triple male branch reducer has a strong thermoplastic (PBT) body; stainless steel tube gripping claws, collars and POM release sleeves (collets) offer a quick hold and release mechanism to provide a low disconnection force for easy removal of the tubing. BSPP, BSP, G threaded components are nickel-plated brass with NBR O-ring for sealing. BSPP, BSP, G thread one touch tube fittings can be re-used a number of times thanks to replaceable sealing O-ring. The body of triple male branch reducer can be rotated after installation to allow for variations in piping direction. BSPP, BSP, G thread one touch tube fittings are easy to install and release. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. External tightening with a flat wrench. Accommodate metric tubing O.D ranging from 4 mm to 10 mm, inch tube O.D ranging from 1/8" to 3/8". Thread sizes range from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.
All Pneuflex's one touch tube fitting with o-ring, push-in fittings, pneumatic fittings can be used with Polyurethane Tube, Nylon Tube, Polyethylene Tube and PVC Tube.
Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.
|Fluid Admitted||Air, Vacuum, Water (no freezing)|
|Working Pressure||0—1.0 MPa | 0—150 psi|
|Proof Pressure||3.0 M pa | 435 psi|
|Negative Pressure||-100 Kpa | -29.5 In Hg|
|Working Temperature||0—60°C | 32～140°F|
|Applicable Tube||PU / PA / PE / PVC|
|Body||Nickel Plated Brass and PBT|
|Lock Claw||Stainless Steel (SUS)|
|Metric Tube ØD|
|Inch Tube ØD|
|Thread Standard and Type|
|BSPP, G -- 55° Taper Pipe Thread|
Metric Tube (mm)- BSPP, G Thread
|Part No.||Push-in Tube ΦD1(mm)||Push-in Tube ΦD2(mm)||Thread (BSPP, G)|
Inch Tube - BSPP, G Thread
|Part No.||Push-in Tube ΦD1(Inch)||Push-in Tube ΦD2(Inch)||Thread (BSPP, G)|