Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

One touch tube fitting with o-ring male banjo is used to connect a tube at a 90° angle to a  female threaded port. Tightening on the top of the fitting by use of a flat wrench or a socket wrench. Accommodate metric tube O.D ranging from 4mm to 12mm, inch tube O.D ranging from 1/8" to 1/2". Thread sizes range from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.

All Pneuflex's one touch tube fitting with o-ring, push-in fittings, pneumatic fittings can be used with Polyurethane Tube, Nylon Tube, Polyethylene Tube and PVC Tube.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Male Banjo, Pneumatic Fittings, One Touch Fitting with O-ring    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass & PBT
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
BSPP, G -- 55° Taper Pipe Thread
G1/8 G1/4 G3/8 G1/2

Metric Tube (mm)- BSPP, G Thread

Part No. Push-in Tube ΦD(mm) Thread (BSPP, G)
PH 04-G01 4mm G1/8
PH 04-G02 4mm G1/4
PH 06-G01 6mm G1/8
PH 06-G02 6mm G1/4
PH 06-G03 6mm G3/8
PH 06-G04 6mm G1/2
PH 08-G01 8mm G1/8
PH 08-G02 8mm G1/4
PH 08-G03 8mm G3/8
PH 08-G04 8mm G1/2
PH 10-G01 10mm G1/8
PH 10-G02 10mm G1/4
PH 10-G03 10mm G3/8
PH 10-G04 10mm G1/2
PH 12-G02 12mm G1/4
PH 12-G03 12mm G3/8
PH 12-G04 12mm G1/2

Inch Tube - BSPP, G Thread

Part No. Push-in Tube ΦD(Inch) Thread (BSPP, G)
PH 5/32-G01 5/32" G1/8
PH 5/32-G02 5/32" G1/4
PH 1/4-G01 1/4" G1/8
PH 1/4-G02 1/4" G1/4
PH 1/4-G03 1/4" G3/8
PH 1/4-G04 1/4" G1/2
PH 5/16-G01 5/16" G1/8
PH 5/16-G02 5/16" G1/4
PH 5/16-G03 5/16" G3/8
PH 5/16-G04 5/16" G1/2
PH 3/8-G01 3/8" G1/8
PH 3/8-G02 3/8" G1/4
PH 3/8-G03 3/8" G3/8
PH 3/8-G04 3/8" G1/2
PH 1/2-G02 1/2" G1/4
PH 1/2-G03 1/2" G3/8
PH 1/2-G04 1/2" G1/2

Documentation

Male Banjo, Pneumatic Fittings, One Touch Fitting with O-ring, Push in FittingsPH-G Male Banjo, One Touch Fitting with O-ring
Part# ØD E B ØP A G H
PH 04-G01 4 22.5 26 11 5.5 G1/8 12
PH 04-G02 4 24 23.5 11 7.5 G1/4 14
PH 06-G01 6 23 23.5 13.4 7.5 G1/8 12
PH 06-G02 6 25 26 13.4 8.5 G1/4 14
PH 06-G03 6 27 31.5 13.4 11 G3/8 19
PH 08-G01 8 25.5 23.5 15 5.5 G1/8 12
PH 08-G02 8 28.5 26 15 7.5 G1/4 14
PH 08-G03 8 29.5 31.5 15 8.5 G3/8 19
PH 08-G04 8 32.5 38.5 15 11 G1/2 24
PH 10-G01 10 30 23.5 18.8 5.5 G1/8 12
PH 10-G02 10 32 26 18.8 7.5 G1/4 14
PH 10-G03 10 33 31.5 18.8 8.5 G3/8 19
PH 10-G04 10 36 38.5 18.8 11 G1/2 21
PH 12-G02 12 34 26 21 7.5 G1/4 14
PH 12-G03 12 35.5 31.5 21 8.5 G3/8 19
PH 12-G04 12 36.5 38.5 21 11 G1/2 24

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover