Pneumatic Connection Solutions Expert
Pneuflex is manufacturing pneumatic push in fittings, push to connect fittings, composite & brass push-in fittings, plastic & sintered silencers, brass fittings, flow control valves, quick coupling, pneumatic tubing and plastic tubing in China.

One touch tubing fitting with o-ring male straight connector is widely used in pneumatic circuit. In line connection of tube to a female threaded port. One touch tube fitting with o-ring male straight connectors have hexagonal body allowing tightening with wrench, additionally our fittings can be screwed with Allen tool, which is especially convenient where there is limited access to installation place. Accommodate metric tube O.D ranging from 4mm to 16mm, inch tube O.D ranging from 1/8" to 1/2". Thread sizes range is from BSPP, BSP, G 1/8 to BSPP, BSP, G 1/2.

All Pneuflex's one touch tube fitting with o-ring, pneumatic fittings can be used with Polyurethane Tube, Nylon Tube, Polyethylene Tube and PVC Tube.

Shape of Release Sleeve: Oval and Round.
Colors of Release Sleeve: Blue, Red, Black, Grey or Custom Color.
Body Color: Black or Grey.

Male Straight Connector, One Touch Tube Fitting with O-Ring, Pneumatic Fittings, Push in Fittings    Fluid Admitted Air, Vacuum, Water (no freezing)
   Working Pressure 0—1.0MPa | 0—150psi
   Proof Pressure 3.0Mpa | 435psi
   Negative Pressure -100Kpa | -29.5 In Hg
   Working Temperature 0—60°C | 32~140°F
   Applicable Tube PU / PA / PE / PVC
   Body Nickel Plated Brass
   Seal, O-ring NBR
   Lock Claw Stainless Steel(SUS)
 
Metric Tube ØD
4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm 15mm 16mm
 
Inch Tube ØD
1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2"
 
Thread Standard and Type
BSPP, G -- 55° Taper Pipe Thread
G1/8 G1/4 G3/8 G1/2

Metric Tube (mm)- BSPP, G Thread

Part No. Push-in Tube ΦD(mm) Thread (BSPP, G)
PC 04-G01 4mm G1/8
PC 04-G02 4mm G1/4
PC 06-G01 6mm G1/8
PC 06-G02 6mm G1/4
PC 06-G03 6mm G3/8
PC 06-G04 6mm G1/2
PC 08-G01 8mm G1/8
PC 08-G02 8mm G1/4
PC 08-G03 8mm G3/8
PC 08-G04 8mm G1/2
PC 10-G01 10mm G1/8
PC 10-G02 10mm G1/4
PC 10-G03 10mm G3/8
PC 10-G04 10mm G1/2
PC 12-G01 12mm G1/8
PC 12-G02 12mm G1/4
PC 12-G03 12mm G3/8
PC 12-G04 12mm G1/2
PC 14-G02 14mm G1/4
PC 14-G03 14mm G3/8
PC 14-G04 14mm G1/2
PC 15-G02 15mm G1/4
PC 15-G03 15mm G3/8
PC 15-G04 15mm G1/2
PC 16-G02 16mm G1/4
PC 16-G03 16mm G3/8
PC 16-G04 16mm G1/2

Inch Tube - BSPP, G Thread

Part No. Push-in Tube ΦD(Inch) Thread (BSPP, G)
PC 1/8-G01 1/8" G1/8
PC 1/8-G02 1/8" G1/4
PC 5/32-G01 5/32" G1/8
PC 5/32-G02 5/32" G1/4
PC 3/16-G01 3/16" G1/8
PC 3/16-G02 3/16" G1/4
PC 3/16-G03 3/16" G3/8
PC 1/4-G01 1/4" G1/8
PC 1/4-G02 1/4" G1/4
PC 1/4-G03 1/4" G3/8
PC 1/4-G04 1/4" G1/2
PC 5/16-G01 5/16" G1/8
PC 5/16-G02 5/16" G1/4
PC 5/16-G03 5/16" G3/8
PC 5/16-G04 5/16" G1/2
PC 3/8-G01 3/8" G1/8
PC 3/8-G02 3/8" G1/4
PC 3/8-G03 3/8" G3/8
PC 3/8-G04 3/8" G1/2
PC 1/2-G01 1/2" G1/8
PC 1/2-G02 1/2" G1/4
PC 1/2-G03 1/2" G3/8
PC 1/2-G04 1/2" G1/2

Documentation

Male Straight Connector, One Touch Tube Fitting with O-Ring, Pneumatic Fittings, Push in FittingsPC-G Male Connector, One Touch Fitting with O-ring
Part# ØD G A B H
PC 04-G01 4 G1/8 5.5 20 14
PC 04-G02 4 G1/4 7.5 19 17
PC 06-G01 6 G1/8 5.5 21.2 14
PC 06-G02 6 G1/4 7.5 22.2 17
PC 06-G03 6 G3/8 8.5 21 20
PC 06-G04 6 G1/2 11 23.8 24
PC 08-G01 8 G1/8 5.5 25.3 14
PC 08-G02 8 G1/4 7.5 24.5 17
PC 08-G03 8 G3/8 8.5 22.2 20
PC 08-G04 8 G1/2 11 24.5 24
PC 10-G01 10 G1/8 5.5 29 17
PC 10-G02 10 G1/4 7.5 30.5 17
PC 10-G03 10 G3/8 8.5 28.5 20
PC 10-G04 10 G1/2 11 26 24
PC 12-G01 12 G1/8 5.5 30 20
PC 12-G02 12 G1/4 7.5 32 20
PC 12-G03 12 G3/8 8.5 32.5 20
PC 12-G04 12 G1/2 11 31 24
PC 14-G02 14 G1/4 7.5 35.5 24
PC 14-G03 14 G3/8 8.5 37.5 24
PC 14-G04 14 G1/2 11 40 24
PC 15-G02 15 G1/4 7.5 35.5 24
PC 15-G03 15 G3/8 8.5 37.5 24
PC 15-G04 15 G1/2 11 40 24
PC 16-G02 16 G1/4 7.5 35.5 24
PC 16-G03 16 G3/8 8.5 37.5 24
PC 16-G04 16 G1/2 11 40 24

 

*Information contained herein may be changed without prior notification.

Crossover

Crossover