Brass push to connect fittings with o-ring, also called brass push in fittings with o-ring, brass one touch fittings with o-ring, are made of nickel plated brass for corrosion resistance, ductility at high temperature and low magnetic permeability for alternative to plastic ones. Brass push to connect fittings are an excellent alternative to those made of plastic materials. To connect, simply push the tube into fitting until it bottoms out, the stainless collet grips onto it and prevents it from being released; to disconnect, push onto the outer metal ring, called sleeve.
Brass push to connect fittings are available in few common types, straight, elbow, tee, reducer, union, bulkhead, plug, etc. Nickel plated brass push to connect fittings are recommended for compressed air, pneumatic, instrumentation, circuit, lubricant and cooling lines. Brass push to connect fittings are solution for pneumatic applications and other fluids in aggressive environment.
Accommodate metric tubing O.D ranging from 4mm to 16mm and inch tubing O.D 1/8" to 1/2". Thread sizes range is from BSPP, BSP, G 1/8" to BSPP, BSP, G 1/2".
Brass Push to Connect Fittings
| || ||Fluid Admitted ||Air, Water, Steam |
| ||Working Pressure ||0-2.0MPa | 0-290psi |
| ||Working Temperature ||-20°C—120°C | -4°F—248°F |
| ||Body ||Nickel Plated Brass |
| ||O-ring ||FKM(Viton)/NBR |
| ||Applicable Tubing ||PU/PA/FEP/PFA |
|PT, R, BSPT - 55° Taper Pipe Thread |
|R1/8 ||R1/4 ||R3/8 ||R1/2 ||R3/4 ||R1 ||R1-1/4 ||R1-1/2 ||R2 |
|BSPP, G - 55° Parallel Pipe Thread |
|G1/8 ||G1/4 ||G3/8 ||G1/2 ||G3/4 ||G1 ||G1-1/4 ||G1-1/2 ||G2 |
|UNF ||NPT - 60°American Standard Taper Pipe Thread |
|10-32 UNF ||1/8 NPT ||1/4 NPT ||3/8 NPT ||1/2 NPT ||3/4 NPT ||1 NPT ||1-1/4 NPT ||1-1/2 NPT ||2 NPT |
|Metric Thread |
|M5 x 0.8 ||M6 x 1 ||M8 x 1 ||M8 x 1.25 ||M10 x 1 ||M10 x 1.25 ||M12 x 1.25 ||M12 x 1.5 ||M14 x 1.5 ||M16 x 1.5 ||M20 x 1.5 |
|4mm ||5mm ||6mm ||7mm ||8mm ||9mm ||10mm ||12mm ||14mm ||15mm ||16mm |
|1/8" ||5/32" ||3/16" ||1/4" ||5/16" ||3/8" ||1/2" |