Brass flow control valve with O-ring meter-out style is made of nickel plated brass. Meter-out flow control valve only controls the flow rate of air entering from the thread side, whereas air entering from the tube side comes out from the thread side at the same (not controlled) flow rate. A knobbed screw with a locking nut is used to adjust air flow on the inlet side. Available with push to connect output fittings. Multiple sizes available. Maximum operating pressure of 2.0 MPa (290 PSI). Operational temperature range of -20—120°C (-4°F to 248°F). Accommodate metric tubing O.D ranging from 4 mm to 16 mm and inch tubing O.D 1/8" to 1/2". Thread sizes range is from G, BSP, BSPP 1/8 to G, BSP, BSPP 1/2.
All Pneuflex's flow control valves can be used with Polyurethane Tubing, Nylon Tubing, Polyethylene Tubing and PVC Tubing.
|Fluid Admitted||Air, Vacuum, Water (no freezing)|
|Working Pressure||0—2.0 MPa | 0—290 psi|
|Working Temperature||-20—120°C | 32～248°F|
|Applicable Tube||PU / PA / PE / PVC|
|Body||Nickel Plated Brass|
|Lock Claw||Stainless Steel (SUS)|
|Metric Tube ØD|
|Inch Tube ØD|
|Thread Standard and Type|
|G, BSP, BSPP -- 55° Taper Pipe Thread|
Metric Tube (mm)- G, BSP, BSPP Thread
|Part No.||Push-in Tube ΦD(mm)||Thread (G, BSP, BSPP)|
Inch Tube - G, BSP, BSPP Thread
|Part No.||Push-in Tube ΦD(Inch)||Thread (G, BSP, BSPP)|
*Information contained herein may be changed without prior notification.